How long does it take to fit a new tyre? +
A single tyre change typically takes 15 to 30 minutes, including removing the old tyre, fitting and balancing the new one, and torquing the wheel nuts to the correct specification. If you are having all four tyres replaced, expect the job to take around 45 minutes to an hour. Mobile fitters work to the same timescales as a garage.
What does the TPMS warning light mean? +
The TPMS (Tyre Pressure Monitoring System) warning light indicates that one or more of your tyres has dropped below the recommended pressure. This could be caused by a slow puncture, a change in temperature, or simply natural air loss over time. Do not ignore it — under-inflated tyres increase braking distances and can overheat at speed. Check your pressures at the nearest petrol station or call a mobile tyre fitter.
What should I do if I get a flat tyre on the motorway? +
Pull onto the hard shoulder as far left as possible, switch on your hazard lights, and exit the vehicle from the passenger side away from traffic. Do not attempt to change a tyre on the motorway hard shoulder — it is extremely dangerous. Move behind the crash barrier if there is one, then call a mobile tyre fitter or breakdown service. If you are on a smart motorway with no hard shoulder, stop in an emergency refuge area.
Are winter tyres worth it in the UK? +
Winter tyres use a softer rubber compound and a different tread pattern that provides significantly better grip below 7°C — not just in snow, but on cold, wet roads. In independent tests, winter tyres reduce braking distances by up to 11 metres compared to summer tyres in cold conditions. If you regularly drive in rural areas, hills, or northern parts of the UK, they can be a worthwhile investment from October to March.
What happens during an MOT tyre check? +
During an MOT, the examiner checks that all tyres are the correct size and speed rating for the vehicle, that tread depth is at least 1.6mm across the central three-quarters, that there are no cuts, bulges, or exposed cords, and that tyres on the same axle are of the same type (e.g. not mixing radial and cross-ply). Incorrect tyre pressure is not an MOT failure but the examiner may issue an advisory.
Can a tyre blowout be repaired or does it need replacing? +
A tyre that has suffered a blowout almost always needs replacing. The internal structure of the tyre is usually destroyed by the sudden loss of pressure and the impact damage that follows. Even if the tyre appears intact, the sidewall and carcass will have been compromised. A tyre fitter can inspect it, but in the vast majority of cases a new tyre is the only safe option.