What happens during an MOT tyre check? +
During an MOT, the examiner checks that all tyres are the correct size and speed rating for the vehicle, that tread depth is at least 1.6mm across the central three-quarters, that there are no cuts, bulges, or exposed cords, and that tyres on the same axle are of the same type (e.g. not mixing radial and cross-ply). Incorrect tyre pressure is not an MOT failure but the examiner may issue an advisory.
Can a tyre blowout be repaired or does it need replacing? +
A tyre that has suffered a blowout almost always needs replacing. The internal structure of the tyre is usually destroyed by the sudden loss of pressure and the impact damage that follows. Even if the tyre appears intact, the sidewall and carcass will have been compromised. A tyre fitter can inspect it, but in the vast majority of cases a new tyre is the only safe option.
Should I check my tyre pressures regularly? +
Yes — you should check tyre pressures at least once a month and before any long journey. Under-inflated tyres increase fuel consumption by up to 3%, reduce braking performance, and cause uneven wear that shortens tyre life. Over-inflation reduces grip and causes the centre of the tread to wear faster. Your correct pressures are listed in the vehicle handbook and on a sticker inside the driver's door frame or fuel filler cap.
What is the legal minimum tyre tread depth in the UK? +
The legal minimum tread depth in the UK is 1.6mm across the central three-quarters of the tyre, around its entire circumference. However, most motoring organisations recommend replacing tyres at 3mm, as braking performance drops significantly below this level. Driving on tyres below 1.6mm carries a fine of up to £2,500 and 3 penalty points per illegal tyre — so four bald tyres could mean a £10,000 fine and 12 points.
How long does it take to fit a new tyre? +
A single tyre change typically takes 15 to 30 minutes, including removing the old tyre, fitting and balancing the new one, and torquing the wheel nuts to the correct specification. If you are having all four tyres replaced, expect the job to take around 45 minutes to an hour. Mobile fitters work to the same timescales as a garage.
How do I read my tyre size? +
Your tyre size is printed on the sidewall in a format like 205/55R16 91V. The first number (205) is the width in millimetres, the second (55) is the aspect ratio as a percentage of the width, R means radial construction, and 16 is the wheel diameter in inches. The number after (91) is the load index and the letter (V) is the speed rating. Your vehicle handbook and the sticker inside the driver's door frame show the correct size for your car.